Application Segments

Oil & Gas/CPI

Melting Route

VIM + ESR or Airmelted + ESR

Product Description

BÖHLER L004 belongs to the group of highly corrosion-resistant nickel-chromium-molybdenum alloys with very low carbon, iron and silicon content and has good corrosion resistance, even at elevated temperatures. The combination of chromium with a high molybdenum content gives BÖHLER L004 exceptional resistance to a wide range of chemical media: e.g. contaminated, reducing mineral acids and good resistance under reducing and oxidising conditions, e.g. hot, contaminated media such as sulphuric acid, nitric acid, dry chlorine, formic acid, acetic acid, solvents, chlorine and chloride-containing media. Due to its composition, BÖHLER L004 shows a significantly reduced tendency to form precipitates in the temperature range between 650 and 1,040 °C. This improves the resistance to intergranular corrosion. Due to the high nickel content, the material is practically insensitive to chloride-induced stress corrosion cracking even in hot chloride solutions. Due to its excellent thermal stability, the alloy is easily weldable and is usually used in the welded condition. Suitable for pressure vessels with wall temperatures from-196°C to 400°C.

Property Features

Nickel-chromium-molybdenum alloy with good corrosion resistance, even at elevated temperatures.
Very good resistance to reducing and oxidizing conditions, including hot contaminated media such as sulfuric acid, hydrochloric acid, formic acid, acetic acid, solvents, chlorine and chlorinated media. This material also has a low tendency to intercrystalline corrosion, stress corrosion and pitting.
L004 is easily weldable due to its high thermal dimensional stability.

Technical Specifications

Material Numbers

Alloy C4 2.4610 NiMo16Cr16Ti N06455


17744 17752 B574 NACE MR0175 / ISO 15156 VdTÜV WB424

Chemical Composition

Chemical composition (average %)
max. 0.009 max. 0.050 max. 1.00 max. 0.020 max. 0.010 14.50 to 17.50 14.00 to 17.00 REM max. 2.00 max. 0.70

Available product shapes

Information on Long Products ) Presented data refer exclusively to long products. Please observe the detailed explanations at the end of the data sheet (pdf).

  • Long Products
  • Plates
  • Semi-Finished Products / Billet
Please use a browser that is not outdated.

You are using an outdated web browser.

Errors may occur when using the website.